Fayetteville Heating and Air

For this job I noticed weakened and rusted components that I explained to Homeowner both components needs to be replace. Also unit needs refrigerant. I wrote up estimate and I was told he will check with his wife before he move forward with everything. I explained about becoming a club member an he will also look over everything to make an decision.

2 system Heat maintenance, checked inducers, blower motors, ignitors all within manufacturer specifications. cleaned flame sensors. Heat and water safeties all working as intended. Drains are clear. Scoped heat exchangers, no visible deterioration. Showed pictures of both filters to home owner he said he would replace them on his own. Both systems are operating correctly and efficiently at time of departure.

DCM1: Heat complete, replaced 20x25x5 filter provided by homeowner. System is fully functional and operating within manufacturer specifications at this time. 0ppms of carbon monoxide in the home. Indoor capacitor was out of range 10 reading 7.8 spoke with homeowner she agreed to have the capacitor replaced. Replaced capacitor and checked operations capacitor is reading 10/10 and blower amps are in range. Capacitor is operating properly. Maintenance checklist and photos attached. Unable to attach photos today will have to upload later.

DCM2: AC complete, checked filters. Both systems are fully functional and operating within manufacturer specifications at this time. Refrigerant pressures and temperatures are appropriate for indoor and outdoor weather conditions. Maintenance checklist attached.

Isolated leaking refrigerant circuit and recover 1 lb of R410 refrigerant. Cut out old flare ( photo attached ), flared a new connection point and secured flare fitting to 20 ft-lb in accordance with manufacturer literature. Pressurized circuit and confirmed no leaks. Removed all moisture and non-condensables by way of a vacuum and tested system. Added 2 lbs of R410. System cools as designed. 19* temperature split between return and supply

Arrived to No Cool Identified leak in saturation line, video attached. Added 2 lbs R410. System is cooling. 17* temp split across the mini-split. Faulty flare fitting, flare nut has been over-tightened. Flare fitting needs to be removed and a new flare fitting installed.

Spoke with homeowner, reschedule for a different day

Upon arrival thermostat was saying installing and AC was not working. Turned system off and back on thermostat restarted and tried to go into cool the failed and restarted. Ohm contactor on outdoor unit and received .6, should be 7-15. Replaced contactor system is now cooling.

DCM2 complete; AC; (2) F16204 need to be replaced. Systems are fully functional. All components are operating within manufacturers specifications. Refrigerant pressures and temperatures are appropriate for indoor and outdoor conditions.

We love when customers call us for a full HVAC replacement, just like the Jones family in Fayetteville. If you're unsure about whether you need to repair or replace your system, our techs are some of the most forthright in the industry. We'll give what we feel is the best absolute estimate for your home HVAC needs. Call today for specials on replacement HVAC systems!